Case study approach to modeling historical disinfection byproduct exposure in Iowa drinking waters

You are here

Date: 
Tuesday, August 1, 2017
Author(s): 
Stuart W. Krasner
Kenneth P. Cantor
Peter J. Weyer
Mariana Hildesheim
Gary Amy
Journal Title: 
Journal of Environmental Sciences
Abstract: 

In the 1980s, a case control epidemiologic study was conducted in Iowa (USA) to analyze the association between exposure to disinfection by-products (DBPs) and bladder cancer risk. Trihalomethanes (THMs), the most commonly measured and dominant class of DBPs in drinking water, served as a primary metric and surrogate for the full DBP mixture. Average THM exposure was calculated, based on rough estimates of past levels in Iowa. To reduce misclassification, a follow-up study was undertaken to improve estimates of past THM levels and to re-evaluate their association with cancer risk. In addition, the risk associated with haloacetic acids, another class of DBPs, was examined. In the original analysis, surface water treatment plants were assigned one of two possible THM levels depending on the point of chlorination. The re-assessment considered each utility treating surface or groundwater on a case-by-case basis. Multiple treatment/disinfection scenarios and water quality parameters were considered with actual DBP measurements to develop estimates of past levels. The highest annual average THM level in the re-analysis was 156 µg/L compared to 74 µg/L for the original analysis. This allowed the analysis of subjects exposed at higher levels (>96 µg/L). The re-analysis established a new approach, based on case studies and an understanding of the water quality and operational parameters that impact DBP formation, for determining historical exposure.

Citation: 

Krasner, S. W., Cantor, K. P., Weyer, P. J., Hildesheim, M., & Amy, G. (2017). Case study approach to modeling historical disinfection by-product exposure in Iowa drinking waters. Journal of Environmental Sciences, 58, 183-190.https://doi.org/10.1016/j.jes.2017.03.007